In the past, mechanical processing was all manual operation of machine tools, but with the development of precision machining, manual processing has been unable to meet the production requirements, electronic numerical control processing has replaced the traditional processing method, and the necessary equipment of CNC machining is horizontal machining center and vertical machining center, so what kind of conditions should be met.
1. Humidity and temperature
The processing environment of CNC machining center is generally below 30 degrees. If the ambient humidity and temperature are too high, the service life of control system components will be reduced. Secondly, if the environmental humidity is too high, the circuit board will fail.
2. Control of current and voltage
There are many equipments in CNC workshop, which will form a large power grid. We need to control the voltage and current within the allowable range of CNC machining center and keep it stable. The power supply should be controlled at 380V, positive and negative within 10%, and three-phase alternating current should be used.
3. Installation environment
The CNC machine tool of CNC machining is a highly integrated product of machine, electricity, hydraulic, gas and light. In order to realize the control of the machine tool, it is necessary to use geometric information to describe the relative motion between the tool and the workpiece, and to use the process information to describe some process parameters that the machine tool must have. For example: feed rate, spindle speed, spindle positive and negative rotation, tool change, coolant switch, etc. The information is stored on the information carrier (such as magnetic disk, perforated paper tape, magnetic tape, etc.) in a certain format, and then read in by the CNC system on the machine tool (or input directly through the keyboard of the numerical control system, or through the communication mode). Through decoding, the machine tool can move and process parts Integrated typical products are the technical foundation of new generation production technology and computer integrated manufacturing system.
These are the problems that need to be paid attention to in precision machining. Operating strictly according to the requirements is good for the quality of finished products and the service life of the equipment. If necessary, please contact us.
Page location ： 
